Suzuki DL650 V-STROM 2012-2016 SL10 350MM Round Stainless Exhaust System

This Exhaust Fits

Frequently Asked Questions

• Will this system fit with a bash plate?
  Yes, This system fits with most bash plates, Some bash plates require a little adjustment to make them fit.
• Is this a full system?
  This is a 3/4 system and requires the OEM front and rear down pipes to be re-used along with our system.
• Is this a de-cat pipe?
  Yes, This is a de-cat pipe and has full flow.
• Which end does the baffle come out?
  The baffle comes out from the inlet side of the silencer.
• Is this a loud silencer?
  Yes, this silencer has a loud deep note but not too loud on most models.
• What is the silencer made of?
  This silencer is made from 304 stainless steel and is hand welded to give impeccable welds and quality finish.
• Do you have a quieter baffle for this silencer?
  
  Yes we do have spark arrestor baffles available for this silencer that will lower the DB levels further.
• What is the inlet I.D of the silencer?
  Inlet I.D is 50.8mm and is a common size for most models.
• Can you repack this silencer?
  Yes you can repack like most serviceable silencers.
• What is the diameter of the silencer?
  O.D of the silencer is 105mm.
• Can I purchase replacement silencer straps?
  Yes you can, Replacements can be found under Accessories section at the bottom of the page.
• What size O2 sensor does this take?
  The O2 sensor thread size is 12mm X 1.25mm.
• How long do I allow the sealant to dry?
  We recommend you leave the sealant to dry 24hrs to cure be fore staring the bike.
• Where do I use the sealant?
  Use the sealant on every pipe to pipe join as this will help seal the system and prevent any exhaust gas leaks.